Imperial Impex

CONSTROMART high pressure injection grouting machine is the professional machine for structure reinforcement, leak stoppage, inject polyurethane and epoxy resin materials with quick disassembly, easy to maintain and super high pressure. The parts of machine are not deformed when being injected. Besides, its small volume can avoid the inconvenience of heavy machinery for workers. Therefore it is the best choice for the persons who work on the professional water-sealing project.

MasterFlow 718 is a ready to use, non-shrink, natural aggregate cementitious grout for use in general civil engineering works. MasterFlow 718 provides extended working life and high early and ultimate strengths.

PU/ Epoxy Injection Grouting Packers nozzles

EPOXY GROUT is hygienic, stain-resistant, 3 component epoxy resin-based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to food products, prevents the entry of bacteria or dirt and is easily maintained in a sterile condition. EPOXY GROUT is designed for grouting glazed tiles, mosaic, vitrified and fully vitrified tiles, ceramic tiles, industrial tiles, granites, marbles & other natural stones, etc. STANDARDS •Exceeds EN 13888 requirements •Conforms to the Global Migration Test laid by USFDA for intended use for contact with aqueous food & beverage (water based) products. AREAS OF APPLICATION ŸWalls and Floors ŸInteriors and Exteriors ŸDry areas ŸShowers ŸSwimming Pools ŸHeavily Trafficked Floors ŸHygienic Sterile Areas ŸKitchens and Cafeterias

Epoxy primer

A high quality polymer-modified, water resistant, cement based grout designed for grouting glazed wall tiles, porcelain tiles, mosaic, vitrified & fully vitrified tiles, natural and engineered stones. AREAS OF APPLICATION Walls & Floors Interior & Exterior Dry Areas Showers Swimming Pools

PU Injection (1K) is Hydrophobic grout based on polyurethane. Upon contact with water, it reacts to form a closed cell rubber-like foam while expanding its volume up to 27 times. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not affected by water or dryness. The reacted material does not shrink or swell. Depending on the pressure of injection, it reacts to a form a very dense material or foam.